Ready Boost Your Computer With a USB Flash Drive

Derek Rogers asked:

If you have found that your computer is running a little slower and you want to speed up games, videos and the Windows operating system itself, there could be a solution. Since Windows is able to access memory much faster than it can get things off the hard drive, recently used programs run more quickly than ones that you haven’t touched in a while. Unfortunately, newer versions of Windows, including Vista, require a lot more memory than earlier ones.

It’s possible to buy new memory just about everywhere, but there are some reasons this might not be the best solution. Inexperienced users may have trouble installing these cards and it’s possible to run out of extra slots. The solution that can make things easier is your USB port, plug a flash drive into it and you will be able to add a little more to your system.

Using Ready Boost along with a USB flash drive allows you to easily and quickly add more memory to your computer, speeding things up for software and you’re OS. It’s just a matter of plugging in the drive, installing the program and adding the extra memory to your computer.

Make sure you have a flash drive and a computer capable of USB 2.0. Once you plug the drive into your computer, you will get an autoplay dialog box, including a selection for “Speed up my system”. Turn on “Use this device” and you will get more memory! Try out your most resource heavy program, like a game or computer art program, to test the results. The flash drive will be used just like the RAM inside the computer, offering a boost in speed.

Ready Boost doesn’t just work with USB drives, either, it will also work with SD cards and Compact Flash cards, such as the ones used in a digital camera. However, your computer must have a built in card slot to use these, external card readers won’t work. In addition, you must have Windows Vista and a card that offers Ready Boost compatibility. Look on the packaging to find a Ready Boost logo.

Only one flash drive can be used per computer and there are size limitations, you can only use Ready Boost with memory devices between 256 Mb and 4 Gb in capacity. Larger or smaller drives don’t work. The speed boost you will get depends on the capacity of the drive. Try using a USB flash drive with the same capacity as your computer’s memory.

Therefore, a 1 Gb RAM computer should use a 1 Gb flash drive; smaller flash drives would significantly reduce the speed you’d get from using Ready Boost. It’s also important to remember that you can’t use this flash drive for file storage while it’s being used by Ready Boost. You will have to change the settings under Properties, or reformat the drive if you want to do this.

For Vista computers that need a boost of speed, a USB flash drive and Ready Boost could be the solution. Remember to pay attention to the drive size and other factors and you will soon be surfing, gaming and working a whole lot faster.

How to Create an XP Bootable USB Flash Drive

Derek Rogers asked:

An XP bootable flash drive is a flash memory device that has been configured to allow you to boot up Windows XP on a computer by plugging in your flash drive device into the USB port. An XP bootable flash drive is highly useful for two purposes:

1. Booting up XP to troubleshoot on any computer that permits the boot.

2. Transporting Windows applications between different physical locations such as home and the office.

To create an XP bootable flash drive, you first need a computer that has BIOS that will permit you to configure its USB port as a configurable device. Then you need a flash memory drive that is set up to be able to act as a booting device. It might not be readily known at first if you have a flash memory drive that is going to boot; one thing to look for when you access a computer’s BIOS is whether or not the plugged-in flash drive appears in the listed items on the setup screen. Hopefully this happens, and you can then select this as the first device to check during your boot sequence. Some computers might require that you hit F10 to select your flash memory device.

Assuming that you have the computer and the drive that you need, now you need to get the software that will permit you to condense Windows XP onto your flash memory device.

This includes: PE Builder, which is easy to install just by following the directions; you need to install it into your root directory and make a folder in C:PEBUILDER3110a called SRSP1. This will enable you to download Windows Server 2003 Service Pack One to this place. There are only two files you need from it: setupldr.bin and ramdisk.sys. Don’t extract anything else, because you may totally corrupt your current version of Windows if you do. Specifically, never run the Windows Server 2003 SP1 executable file.

Once you have these files, run your PE Builder CD (Windows XP Professional CD). Make sure you hold down the [Shift] key to prevent Autostart from launching the CD. Launch PE Builder manually. When the Source field on the main PE Builder screen, enter the letter of the drive in which you put the CD. Check to see that the Output box contains BartPE and that the “None” option is selected in the Media Output panel. Once you have all this squared away, click Build. You can watch the progress of the compression.

When it’s complete you’re prepared to format and copy the Windows XP Professional bootable image to the UFD with the BartPE USB Installer. Open a Command Prompt window and use the CD command to switch to the pebuilder3110a folder.

Next, insert the UFD into a USB port; note the drive letter to which it is assigned, as you’ll need to enter it into your next command prompt that you type.

Let’s imagine that it was assigned to drive E. You will now type the following command (take note of the last letter in the command).

pe2usb -f e:

When Bart is all done, you just hit any key to exit the program, and you have your XP bootable flash drive.

Do you Know These 5 Tips to Get the Best Mp3 Player for Listening to Old Time Radio?

Ned Norris asked:

If you are looking to buy an MP3 player for listening to old time radio shows, or spoken word in general, there are several important factors that should concern you. These factors might not be at the top of the list if youre buying one to listen just to music, but if youre an old time radio fan theyre well worth remembering.

1. Look for a player that has a good graphic equalizer feature.

With the graphic equalizer you can fine tune what you hear, much better than a treble selector or a bass button. Instead of just being able to adjust the bass (deep sounds) or the treble (high frequency sounds) you have much more control. Usually, there will be five or more sliders. The slider to the right will adjust the very high frequencies and the slider to the left will adjust the very low-level bass sounds. The three or more sliders in the middle will adjust various aspects of the midrange.

Imagine you were listening to an old time radio show that had a bit too much hiss. To get rid of this with a graphic equalizer all you would do as lower the slider on the right (thats the high frequency one) and youll notice the hiss either vanishes completely or is greatly reduced.

The great thing with graphic equalizers is that they really can improve the listening experience, which is particularly useful with old radio shows. Rather than just settle for poor sound quality you can actually do something about it if you have a good graphic equalizer.

2. Get a player that can act as a virtual hard drive

Many players (not the iPod Im afraid) will act as an additional hard drive when you plug them into your USB port. This is very convenient if you have many shows to copy over. All you need to do is copy the folders from your normal hard drive and then paste them straight onto your player. No need to mess around with third-party software such as iTunes or Windows Media Player. It makes it so quick and easy that you can copy hundreds of files in just a matter of minutes.

Regrettably, if you happen to love iPods, you need to use iTunes all the time. For some people this is fine, but for most people it is much quicker and easier just to quickly select files from one folder and paste them into another folder. If you choose your player right youll be able to do exactly that.

3. Make sure your player remembers where you are

Some players have a frustrating habit of returning you to the start of the file if you happen to switch the device off when youre halfway through listening to a show.

This is not good as it means that when you switch your MP3 player on next time, you will need to try finding the exact point that you were listening to.

Its also worth checking to see if the player you are thinking about getting has a bookmarking feature. Many players will allow you to set a bookmark at any point in the recording so you can return to that point whenever you like. This is very useful if, for example, you want to break off listening to an old time radio show or audiobook and listen to some music for a while. If youve set a bookmark you can quickly return to the exact point you were at. This could be later the same day, a few days later or even many months later. Its a neat feature thats well worth having.

4. An auto-off feature

If you enjoy listening to old time radio shows in bed its well worth checking to make sure the player you are thinking about has an auto-off feature. Without such a feature it means the player will continue to play until the batteries run flat, which isnt ideal.

Some players have a sleep facility that lets you set a specific time, after which the player will turn itself off automatically. Others, such as the creative, offer a permanent auto-off feature that will turn the player off if no buttons are pressed for a set period of time. This can be very useful as it means that even if you forget to set the sleep-timer the player will turn itself off after an hour, or whatever length of time youve set for the auto-off timer.

5. Sufficient space for all your audio files

When buying a player its important to consider how much space you will need for files.

Its easy to think that the more space the better, but this isnt always the best way to approach the matter.

For example, theres no point getting a player with 60 gig of space if youre just going to use a couple GBs. Equally, its not wise to buy a player with only 1 gig of memory if youre planning on copying your whole old-time radio show collection onto it.

Personally, I prefer a smaller sized player, such as the Creative Zen Plus, with 8 gig of memory than a larger sized player, in physical terms, with 50+ gig on it. From experience I know that Im never going to fill more than 5 or 6 gig at any one time and so anything more would be a waste.

The easiest way to calculate how much space you need is to remember that a typical old time radio show is roughly seven megabytes and a typical music track is usually about five megabytes. So, on a 4 meg player youd be able to store roughly 570 old time radio shows (thats about 285 hours of listening) or 800 music tracks, which is about 80 full CDs. On an 8 meg player youd get twice this amount, which for most people is more than enough.

Another benefit of the smaller players is the storage tends to be solid-state, rather than a mini hard drive, which means theyre quite elastic and harder to damage if if you drop them by any chance.

I hope that these five tips will help you in your quest to get the right player for your needs. Whatever you do, don’t get overwhelmed by the wide variety of players now available.

Just use these five tips and you’ll be able to eliminate over seventy percent of them straight away, which will give you a much more manageable list to select from.

The Benefits Of The Bluetooth Wireless USB Adapter

MIKE SELVON asked:

Bluetooth mobile wireless technology is the clear and simple choice when you need convenient, short-range connectivity and communication between various electronic devices, and all without the hassle of a web of wires and cables. Bluetooth technology is a standard that is globally available and simple to use because driver software does not need to be installed. The Bluetooth wireless USB adapter is making the benefits of Bluetooth technology available to almost any device that has a USB port.

There is a wide array of products that are becoming available on the market that use the Bluetooth wireless technology networking, such as: cellular phones, laptop computers, a wireless technology PDA, a wireless stereo headset, hand-held computers, cell phone headsets and MP3 players. These are just some of the products that commonly have this technology integrated into them and more are being introduced on the market all the time. An enabled USB adapter allows you to add mobile wireless technology to a desktop computer or a laptop computer, that is not equipped with Bluetooth capabilities.

Once you add a Bluetooth wireless USB adapter to your non-Bluetooth computer, you will then have the capability of the wireless technology networking aspects of Bluetooth. This will allow your computer to wirelessly connect, communicate and interact with the other Bluetooth enabled electronic devices that you own.

The enabled USB adapters of this technology are specifically designed to plug directly into any available Universal Serial Bus (USB) port that is built into your laptop computer or your desktop PC. This enables your computer to be able to make short-range connections to its other devices.

The typical range of the USB adapter is approximately 300 feet. However, the range will be affected by a number of things and the effective range could be less. Things such as terrain, the general environment, the number of other people or devices connecting, and local interference sources can all reduce the actual range of the network of this technology.

A Bluetooth enabled wireless USB adapter communicates with its other devices by means of radio transmission over a radio band frequency which is not licensed. Over this type of short-range wireless technology networking setup, voice transmissions and data transmissions can be done simultaneously and they are virtually instantaneous.

This also ensures that transmissions have protection from interference of most types and that data transfers are secure. This helps in the sharing and accessing of data and information in a timely manner that is simple and easy to use.

One of the best benefits about adding Bluetooth technology to your computer with a Bluetooth wireless USB adapter, is that you can move away from all the wires and cables that are such a part of technology today. But, even though many devices will still need a power cord, at the very least to be recharged, the mobile wireless technology that is so simple to implement, thanks to Bluetooth, will at least eliminate some of the cords and wires that can be such a nightmare to manage.